How Much Does Pressure Washing Cost in the Twin Cities?

If you're pricing out pressure washing for your home, here's the short answer: most residential pressure washing jobs in the Twin Cities run between $150 and $700. A standard two-car driveway usually lands in the $150 to $350 range, a full house wash typically runs $300 to $700, and smaller jobs like a patio or sidewalk can come in under $200. The final number depends on the surface, the square footage, and how much buildup we're dealing with — so let's break down what actually goes into the price, and how to make sure you're comparing quotes fairly.

Typical Pressure Washing Prices in the Twin Cities

Every home is different, but after cleaning exteriors across the metro since 1988, we can tell you where most jobs land. These ranges reflect what homeowners in Anoka, Hennepin, Ramsey, Washington, Dakota, and Scott counties can generally expect from a licensed, insured professional:

• Driveway (two-car): $150–$350, depending on length and staining
• Sidewalks and walkways: $75–$200, often added onto a driveway job at a discount
• Patio or pool deck: $100–$300, depending on square footage
• House siding (full soft wash): $300–$700 for most single-family homes
• Deck or fence: $150–$500, depending on size and condition
• Full exterior package (house, driveway, walks): often $500–$1,000, with bundle savings

If a quote comes in far below these ranges, ask why. And if it comes in far above, ask what's included — sometimes a higher quote covers gutters, windows, or sealing that a cheaper one doesn't.

What Drives the Price Up or Down

Square footage is the biggest factor, but it's not the only one. The condition of the surface matters just as much. A driveway with a few seasons of ordinary grime cleans up quickly. One with years of embedded oil stains, rust, or thick moss takes more time, more attention, and sometimes specialty treatments — and that shows up in the price. Access matters too: a walkout home on a slope, tight side yards, or landscaping that needs protecting all add careful work. Finally, the type of cleaning changes the cost. Delicate surfaces like vinyl siding, roofs, and painted wood call for soft washing — lower pressure paired with professional cleaning solutions — which is a different process than blasting a concrete slab.

Pressure Washing vs. Soft Washing: Why It Matters for Your Quote

When you gather quotes, make sure you know which method each company plans to use. True pressure washing is right for concrete, brick, and stone. Soft washing is the safer choice for siding, roofs, and anything that high pressure could crack, strip, or force water behind. A company that quotes you a rock-bottom price to 'pressure wash' your vinyl siding may simply be planning to point a high-pressure wand at it — which can void siding warranties and drive water into your walls. Part of what you're paying a professional for is knowing which tool fits which surface. At Starbrite, we're OSHA certified, fully insured and licensed, and we match the method to the material every time.

Why the Cheapest Quote Often Costs the Most

We've been family-owned in Blaine since 1988, and in that time we've been called out to fix plenty of bargain jobs: etched lines carved into concrete by an inexperienced operator, stripped deck stain, torn window screens, and siding with water stains behind it. Pressure washing equipment is easy to rent and hard to master. When you're comparing companies, the questions below tell you more than the price does:

• Are you fully insured and licensed? Ask for proof — a reputable company will have it ready.
• Will you use soft washing on siding, roofs, and painted surfaces?
• What's included in the price — pre-treatment, post-rinse, moving patio furniture?
• Do you guarantee your work, and what happens if something gets damaged?
• How long have you been serving the Twin Cities?

Any established local company should answer those without hesitation. We're BBB A+ accredited (since 2012), and we've cleaned more than 12,000 homes and 2,000 commercial properties across the metro — so we've learned that doing the job right the first time is always cheaper than doing it twice.

How to Save Money on Pressure Washing

The best way to lower your cost per service is bundling. Once a crew is at your home with equipment set up, adding the sidewalk to a driveway job — or pairing a house wash with window cleaning or gutter cleaning — costs far less than booking each service separately. Timing helps too: spring and early summer book up fast in Minnesota, so scheduling ahead gives you more flexibility. And regular maintenance is genuinely cheaper than restoration. A driveway washed every year or two cleans up quickly; one left for a decade may need multiple passes and stain treatments.

What You Get With a Professional Job

A professional pressure washing visit isn't just a rented machine and a garden hose. It's commercial-grade equipment, the right cleaning solutions for each surface, pre-treatment of stains, protection for your plants and fixtures, and a trained technician who knows exactly how much pressure each material can take. That's the difference you're paying for — and it's why the results last longer and your surfaces stay undamaged.

Get an Exact Price for Your Home — Free

Ranges are helpful, but your driveway isn't a range — it's your driveway. The fastest way to know your exact cost is a free quote. Call Starbrite Window Cleaning at (952) 922-6860 or click Request a Quote and tell us what you'd like cleaned. We'll give you a clear, honest price with no surprises — the same way this family has done it in the Twin Cities since 1988.